• Heating pipes are held in place by means of Tacker staples or fixing rails
  • Easily install underfloor heating on large surfaces
  • Available with 20mm or 30mm EPS insulation

Tacker Insulation Plates; an underfloor heating system in which the heating pipes are held in place by means of tacker staples. This is a system commonly used to install underfloor heating on large surfaces, but can also perfectly be used for smaller surfaces. The corresponding tacker stapling device must be used to apply the Tacker staples. In average 3 staples are used per one metre of pipe. You can also choose to place fixing rails on top of the insulation and simply fix the heating pipes in the rails.

20mm insulation plate

Size:  10m²
Type of insulation: EPS-EN13163
Insulation thickness: 20mm
Payload of screed: 100 Kpa
Grid foil marking: 50 / 100mm
U-Value: 2.27 m² K/W

30mm insulation plate

Size:  10m²
Type of insulation: EPS-EN13163
Insulation thickness: 30mm
Payload of screed: 100 Kpa
Grid foil marking: 50 / 100mm
U-Value: 1.49 m² K/W

Call Now Button
Save Cart
Your Shopping Cart will be saved and you'll be given a link. You, or anyone with the link, can use it to retrieve your Cart at any time.
Back Save Cart
Your Shopping Cart will be saved with Product pictures and information, and Cart Totals. Then send it to yourself, or a friend, with a link to retrieve it at any time.
Your cart email sent successfully :)